max2h EVOLIFT BMW R 1200 R Montageanleitung Seite 10

HINTS:
8. For optimum alignment of the adapter plate on the
base plate [G1], an extended base plate [G2] is
available; the extended base plate can be rotated by
180°.
9. The inclination must be adjusted so that both wheels
lift off the ground at the same time.
On some models, the point of contact of the center stand is very decentralized towards the rear wheel, which is why the weight of the motorcycle
This means that the center stand requires a larger negative tilt presetting and must therefore be lifted slightly with the tip of the foot.
On some models, the stand is rolled up on the rollers, which are located on the ground.
G2
The instructions for adjusting the tilt can be found on our homepage.
IMPORTANT:
leans forward.
G1