Motostar ESC500 Gebrauchs- Und Wartungsanleitung Seite 5

TRANSMITTER
The table should be fi lled out by the operator fi tter.
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSES
No power supply
The gearmotor is not locked
The transmitter battery is flat
The gate neither opens
The transmitter is broken
nor closes
The stop button is either jammed or malfunctioning Contact the support service
The control button or key selector switch is
jammed or faulty
The photocells are damaged
The gate neither opens
The photocells are engaged
nor closes
The flashing light does
LED board damaged
not work
Key
1
2
3
4
Function
FIXES AND REMEDIES
Check power supply
Lock the gearmotor
Replace the batteries
Contact the support service
Contact the support service
Contact the support service
Make sure the photocells are clean and in
working order
Contact the support service
Contact the support service