Secure Router 4134 Power And Grounding - Avaya Secure Router 2330 Bedienungsanleitung

Secure Router 4134 power and grounding

Secure Router 4134 power specifications
The following table describes the Secure Router 4134 chassis AC and DC power supply
units.
Table 4: Power supply specifications
Power supply
250 W AC
660 W AC
250 W DC
Caution:
Watch the power supply status LED for alerts when you hot swap a power supply unit.
Caution:
Ensure you use an appropriately rated AC power cord only. Do not use an extension cord.
Secure Router 4134 grounding specifications
The Secure Router 4134 ships with a grounding lug. You must connect your ground wire to
the lug and attach the lug to the chassis in the upper right-hand corner of the front panel. You
must attach the other end of the ground wire to the most convenient site ground point for your
installation. Use a maximum of 8 AWG grounding cable for the Secure Router 4134.
Important:
Avaya recommends that you install the chassis in the equipment rack before you install the
ground lug and the optional external interface modules.
Regulatory Information
Secure Router 2330/4134 power and grounding specifications
Input
100-240 V AC +12 V DC at 250
Watts (20.83 Amp at
nominal voltage)
100-240 V AC +12 V DC at 250
Watts (20.83 Amp at
nominal voltage)
-40 to -72 V DC +12 V DC at 250
Watts (20.83 Amp at
nominal voltage)
Output to router
components
N/A
+54 V DC at 410
Watts (8.2 Amp at
+54 V DC) (isolated
from the +12 V DC
output)
N/A
PoE output
August 2013 21