DeLOCK 61886 Bedienungsanleitung Seite 2

English
Description
The USB 2.0 to serial adapter by Delock enables you to connect 2 serial devices
to a free USB port of your PC or laptop.
Specification
• Connectors:
1 x USB 2.0 Type-A male >
2 x serial RS-232 DB9 male
• Chipset: FTDI
• Serial connector with screw
• Data transfer rate up to 460.8 Kb/s
• Supports remote wake-up and power management
• Cable length: ca. 1.4 m
System requirements
• Windows 7/7-64/8.1/8.1-64/10/10-64/11
• PC or laptop with a free USB Type-A port
Package content
• USB 2.0 to 2 x serial adapter
• Driver CD
• User manual
Safety instructions
• Protect the product against moisture
• Protect the product against direct sunlight
Driver Installation
1.
Switch on your computer.
2.
Put the driver CD in the CD ROM drive.
3. The CD will start automatically. If not please follow step 4.
4. Open Windows Explorer, select: CD-drive\Autorun.exe.
5. Connect the adapter to an available USB port of your computer.
6. The adapter will now be fully installed.
7.
Click on "Close".
8.
You can now start to use the device.
-2-