Burda TERM2000 BLUETOOTH Montage- Und Gebrauchsanweisungen Seite 8

CLEANING:
1. First, disconnect the equipment from the
power supply system!
2. After the appliance has cooled down, the
housing can be wiped dry.
3. Do not touch the quartz rods with your fingers
since stains could build up from such a
contact.
SWITCHING ON FOR THE FIRST TIME:
After switching on the appliance for the first time or extended periods on non-use, the appliance may
smell for a short time.
REPAIR/CUSTOMER SERVICE
1. If the power cord is damaged, it must be
replaced by the manufacturer, its service
agent or a similarly qualified person in order
to avoid a hazard.
2. If the heater is defective, it must be checked
and repaired by the manufacturer, its service
Important! Any tampering with the appliance will invalidate the warranty.
Repairs carried out improperly and by unqualified persons may have serious consequences for
CORRECT DISPOSAL OF THIS PRODUCT
This marking indicates that this product should not be disposed with other household
wastes throughout the EU.
To prevent possible harm to the environment or human health from uncontrolled waste
disposal, recycle it responsibly to promote the sustainable reuse of material resources.
To return your used device, please use the return and collection systems or contact
the retailer where the product was purchased. They can take this product for
environmental safe recycling.
TECHNICAL DATA
Rated voltage
Power (watt)
Installation
Min. distance from
floore (m)
Insulation
IP Waterproof
protection
Kabellänge (mm)
Product Size
w x h x d
EN
4. The reflector should be cleaned regularly.
5. Do not use any abrasive or caustic cleaning
agents!
6. Never immerse the appliance in water!
Danger to life!
representative, or similarly qualified persons
for repair.
3. Repairs and interventions in the device are
only permitted by authorized specialist
personnel!
the user!
230-240V~，50Hz
200
Wand
2,1
I
IP66
1800
710 x 95 x 125
8