Dmx Output Via Art-Net; Network Settings; Activating Devices - EuroLite LED PC CONTROL ARTNET/DMX Bedienungsanleitung

9

DMX OUTPUT VIA ART-NET

Network Settings

The software supports Art-Net output of 32 DMX
universes via Ethernet and uses the computer's
network card. For Art-Net operation, the computer's
network settings must be set to a certain IP address
according to the Art-Net specifications.
Call the computer's network settings and set an
individual IP Address in the following IP address range:
- 2.0.0.1 I 2.55.255.254 or
- 10.0.0.1. I 10.2.55.255.254
Set the corresponding subnet mask to 255.0.0.0.
The IP addresses of the computer and the Art-Net
device need to be different.
..............................................................................................................................................................................

Activating Devices

Select Options in the Tools menu and go to Art-Net. Click Refresh Art-Net Nodes to search for
Art-Net devices. The devices found will be listed below.
www.eurolite.de
Fig. Example under Windows 7
25