Stand-Alone Mode And Data Transfer - EuroLite LED PC CONTROL ARTNET/DMX Bedienungsanleitung

8
STAND-ALONE MODE AND
DATA TRANSFER
This chapter provides basic information on the use of the interface together with the software. You
can find extensive information in the program's help section and on the CD.
..............................................................................................................................................................................
The interface is provided with a stand-alone function covering 132 DMX channels. After starting the
application, click the icon in the main tool bar to open stand-alone mode. The menu will come on and the
interface is listed under Devices in the top left corner.
After programming your light show, click the button Save in Memory to write the data into the internal
memory of the interface. The available memory is shown by the bar next to the button.
Then, connect the interface to a power outlet using the optional 5 V power unit. As soon as the interface
receives power, it will automatically trigger the programs stored in the internal memory.
www.eurolite.de
24