Werbung
3.1.1.1 Batteriinformation for niveausensoren
3.1.1.1 Battery information for the Level Sensor
Hver niveausensor drives af et batteri godkendt af Essity, CR2450. Holderen,
Each Level Sensor is operated by an Essity approved battery, CR2450. The
hvor sensoren er anbragt, er forskellig for de enkelte dispensere. Illustrationen
bracket where the sensor is placed looks different for different dispensers, the
viser ét eksempel. Udskiftning af batteriet foregår på samme måde for alle
illustration shows one example. The battery change procedure is the same for
dispensere.
all the dispensers.
Udskiftning af batteri:
To change battery:
Caution: Risk of explosion if the
Forsigtig: Der kan være en
battery is replaced by an incorrect
eksplosionsrisiko, hvis batteriet
type.
udskiftes med en forkert type.
2
Take out the level sensor from the bracket
Tag niveausensoren ud af holderen i
in the dispenser
dispenseren
1
Skub den fleksible krog til side for at
Push the flexible hook to release the
frigive sensoren
sensor
3
Open the cover
Åbn dækslet
Werbung
