Break- In Period - Ronix Rc-5013 Bedienungsanleitung

TO MOVE THE AIR COMPRESSOR
Ensure the air compressor is unplugged, make sure the power cord is
secured in the cord warp.
1) Facing the back of the air compressor, grasp the handle firmly with
two hands.
2) Life the air compressor toward you until it balances on the wheels.
3) Push the unit along to the desired location.
Lower their air compressor unit it sits securely on a flat surface.

BREAK- IN PERIOD

Before first use, run the air compressor at zero tank pressure with the
drain valves fully open for 30minutes.
TURNING THE AIR COMPRESSOR ON/OFF
1) With the air compressor plugged in, pull the power switch to the ON
position to power the compressor on.
2) To turn the air compressor off, push the power switch to the OFF position.
NOTE
When the compressor is in the ON position, the air compressor will
automatically turn back on when the designated tank air pressure
limit. It will also shut off again when the desired limit. It will also shut off
again when the desired pressure is reached.
WARNING!
Never exceed the air tool's pressure rating as recommended by
23
User Manual