Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Configure WDS settings:
To extend the wireless coverage, it supports up to 4 WDS links for connecting
wirelessly to other WDS APs. By default, all WDS profiles are disabled.
A.
Click on the Wireless main menu button.
B.
Select the Repeater Settings tab.
C.
Choose WDS as the Repeater Type.
D.
Choose the desired WDS profile:
If you use another EAP AP as the peer AP, simply repeat the above-mentioned
steps to configure another peer AP(s).
Enable the WDS.
Enter the MAC Address (peer AP) and then Click SAVE.
6
Werbung
