Ronix 2221 Bedienungsanleitung Seite 16

Direction
Switch
Lock
Button
Operating Switch
With Speed
Regulare Wheel
The second handle gives you an additional way of holding the machine firmly.
Depending on the position of the hammer drilling/drilling switch, you can
use your drilling machine as a hammer drill or rotating drill.
The direction switch controls the direction of motion when the machine
is used as a screwdriver or if you would like to remove a drilling bit that
has become jammed.
Using the adjustable bit stop you can fix the depth of blind holes accurately
during drilling.
The mechanical gear box of the machine can be set on two different positions:
1) Low speed: for drilling bigger holes which needs more force.
2) High speed: for drilling holes with lower diameters.
14
Impact Drill 13mm