Werbung
The Anker App for Smart Control
You can remotely control your power station using the Anker App. Please download the app and its user manual
by scanning this QR code.
Connect the device to a network before using the app for the first time. After connecting successfully, you can
connect your devices off-grid.
Light
Ambient light
Press the button once to turn on the ambient light, and press again up to 2 times to switch between brightness
levels.
SOS mode
Press and hold the button for 2 seconds to turn on SOS mode.
05 EN
on
on
on
on
o
o
x1
x2
x1
x3
x2
x3
SOS
2S
SOS
2S
LCD Screen Guide
12
11
10
9
8
7
Current Output Power
Current Input Power
IoT
Press the IoT button once to turn on Bluetooth and Wi-Fi, and connect your devices through the app when this
icon appears on the screen.
Press the IoT button for 2 seconds to turn off Bluetooth and Wi-Fi.
Press the IoT button for 7 seconds to reset Bluetooth and Wi-Fi.
USB-A Output Port
USB-C Output Port
Car Charging
AC Charge and Voltage Frequency
Low-Temperature Alert
When this icon shows, stop using the power station until the icon disappears.
High-Temperature Alert
When this icon shows, stop using the power station and let it cool down until the icon disappears.
Overload Warning
10
This icon appears when a port is overloaded. The port will be turned off to avoid any damage.
Please remove the device causing overload.
Estimated Time to Fully Recharge
11
Estimated Time for Battery to Deplete
12
Remaining Battery for Power Station
13
Power Saving Mode
14
13
14
6
5
4
3
1
2
EN 06
Werbung
