Wall Mounting - Sentinel Bm-50 Installationsanleitung

The BM-50 features an installation bracket that allows simple device installation and
replacement. The bracket is fixed to the wall using 4 screws or adhesive tape.
Remove the bracket by gently lifting the clips on top of the device (1), and then pull the
bracket away from the device.
1. Remove the bracket by gently lifting the clips on top of the device (1), and then pull the
bracket away from the device.
2. Attach the bracket to the wall using included self-tapping screws or adhesive tape.
Be careful to retain the bracket orientation as the top and bottom clips on the bracket
are different. Top clips are longer than bottom ones.

2.1 Wall mounting

7