Parts Designation; Operation; Setting Up; Turning On The Light - Glareone Led Panel 10 Rgb Gebrauchsanleitung

3. Parts designation

2
10
11
12
13
19
EN
1
3 4
9 5
6
3
8 7
2
15
16
14
17
18
20
21
16
Nomenclature:
1. LED chip
2. 1/4" stand mount
3. Magnet
4. Mode button
5. +/- regulator
6. Parameter button
7. Power switch
8. USB-C charging socket
9. Screen
10. RGB mode
11. Color
12. Saturation
13. Power output

4. Operation

4.1 Setting up

1. After removing from the packaging, place the light onto
a stand or attach it to the cameras shoe mount and
tighten the cold shoe lock screw. During assembly, be
careful and make sure that the light does not slip out
of the mount or unscrew from the stand thread.
2. The light is equipped with standard 1/4"-20 female
thread mount which is compatible with many grip
accessories.

4.2 Turning on the light

To turn on the lamp, slide the switch.
The device starts up and the LCD screen displays the operating
parameters. To turn off the lamp, slide the switch key to the
previous position.

4.3 Power supply

The lamp has a built-in 4000 mAh battery.
The operating time is about 90 minutes on full power.
The lamp can also be used connected to power from an outlet
via a USB-C port.
14. Lamp charge level
15. Color balance mode
16. Color temperature
17. Power output
18. Lighting effect mode
19. Selected effect
20. Effect frequency
21. Power output
17
EN