Operating Modes; Rgb Mode; Color Temperature Mode; Lighting Effects Mode - Glareone Led Panel 10 Rgb Gebrauchsanleitung

5. Operating modes

5.1 RGB mode

The GlareOne LED Panel 10 RGB lamp is equipped with a color-changing mode of light
in the RGB space. There are 360 color variations.
To edit a parameter, you need to:

5.2 Color temperature mode

The GlareOne LED Panel 10 RGB lamp is equipped with a function to change the color
temperature of the light from 2700K to 10000K. To change the color temperature, you
need to:
The color temperature values displayed on the LCD screen
may differ from the actual color temperature of the light
emitted by the LED Panel.
EN
HUE - light color of choice from 0-359°
SAT - light color saturation in the range of
0-100%
INT - light output in the range of 0-100%
(1) Press the SET button. The parameter to be
edited will be highlighted.
(2) Hold the +/- regulator toward increasing or
decreasing the parameter value.
(3) Pressing the SET button again switches editing
to the next parameter.
(1) Press the SET button. The parameter to be
edited will be highlighted.
(2) Hold the +/- regulator toward increasing or
decreasing the parameter value.
(3) Pressing the SET button again switches editing
to the next parameter.
18

5.3 Lighting effects mode

The GlareOne LED Panel 10 RGB lamp is equipped with 19 special effects.
(1) Use the +/- regulator to change the effect.
(2) Press the SET button to change the frequency
or power. The parameter being edited will be
highlighted.
(2) Hold down the +/- regulator toward increasing
or decreasing the parameter value.
(3) Press the SET button again to switch editing to
the next parameter.
Efekt: Opis:
fire
police
storm
fire work
fault bulb
TV
color temperature
cycle
RGB multi
blue multi
green multi
Efekt: Opis:
red multi
party
ambulance
fire engine
warning
SOS
headlight
paparazzi
pulse
19
EN