FLINQ FQC8342 Handbuch Seite 4

Manuel
EN
Connect the ceiling fan / light to the FlinQ app
Before plugging the unit into the mains, ensure by visual inspection that the unit is
intact and has not suff ered any damage during transit.
Open the FlinQ app
1
Open the FlinQ app on your mobile
device.
Wi-Fi - 5GHz
Wi-Fi - 2.GHz
Wi-Fi name
************
Fill in the WiFi details
5
Now fi ll in the WiFi name and password
to continue the installation
Add Device
Create Scene
Add the device
2
Select 'Add Device' or the '+' sign and
make sure the wifi indicator light on the
heater is fl ashing rapidly.
FlinQ Smart Indoor Ligth Ceil...
Being added...
Device is being added
6
The device is installed. This can take up
to 2 minutes.
Notes: Please note that only 2,4 GHz networks are supported. 5 GHz networks will
not work. Ask your provider how to turn on both frequencies.
FlinQ Smart Indoor Ligth
Ceiling Fan
Select product type
3
Select your product type via the cooling
section tab. Please select the 'FlinQ Smart
Indoor Ligth Ceiling Fan'.
Device added succesfully
7
The device is installed succesfully and
added to your list of products. You can
now control your device remotely.
FlinQ Smart Indoor Light Ceiling Fan
Reset if needed
4
When light is fl ashing proceed to the next
step. If light is not fl ashing. Turn on and off
for 3 times via wall switch (On > off > on >
off > on > off > on). When light is fl ashing
proceed to next step.