FLINQ FQC8342 Handbuch Seite 3

Manuel
EN
Installing the ceiling fan / light
Before plugging the unit into the mains, ensure by visual inspection that the unit is
intact and has not suff ered any damage during transit.
Turn off main power
1
Before you start installing the ceiling fan /
light, turn of the main power switch.
Connect light to mounting bracket
5
Connect the product to the mounting
bracket placed on your ceiling. Insert
2 screws on both left and right side as
shown on the image above.
Drill the holes
2
Drill the 4 holes in your ceiling.
Turn on main power
6
Turn on the main power and proceed to
the next page of this manual to connect
the product to the FlinQ app.
Insert plugs and place
3
mounting bracket
Insert the 4 plugs in to the drilled holes.
Place the mounting bracket and screw
the 4 screws in to the holes.
FlinQ Smart Indoor Light Ceiling Fan
Connect the wires
4
Connect the wires coming out of your ceiling
to the ceiling fan / light.