Herunterladen Diese Seite drucken

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 5
QUARTZ ANALOG
INSTRUCTIONS
TWO-HAND / THREE-HAND MODELS
1
1. Second Hand
TO SET THE TIME:
1. Pull crown out to first click position B.
2. Turn crown to set time.
3. Push crown back to position A.
TWO-HAND / THREE-HAND DATE
MODELS
1. Date Indicator
TO SET THE TIME:
1. Pull crown out to second click position C.
2. Turn crown to set time.
3. Push crown back to position A.
TO SET THE DATE:
1. Pull crown out to first click position B.
2. Turn crown counter-clockwise to set
date.
3. Push crown back to position A.
NOTE: Do not set the date between 9:00
P.M. and 1:00 A.M. Otherwise, the date
may not change prop e rly on the following
day. If it is necessary to set the date dur-
ing that time period, first change the time
to any time outside it, then set the date
and then reset to the correct time.
THREE-HAND DAY-DATE MODELS
1. Day (of the week) Indicator
2. Date Indicator
TO SET THE TIME:
1. Pull crown out to second click position C.
2. Turn crown to set time.
3. Push crown back to position A.
TO SET THE DAY (OF THE WEEK):
1. Pull crown out to first click position B.
2. Turn crown clockwise to set day.
3. Push crown back to position A.
NOTE: Do not set the day between 9:00
P.M. and 1:00 A.M. Otherwise, the day may
not change properly on the following day.
If it is necessary to set the day during that
time period, first change the time to any
time outside it, then set the day and then
reset to the correct time.
TO SET THE DATE:
1. Pull crown out to first click position B.
2. Turn crown counter-clockwise to set
date.
3. Push crown back to position A.
NOTE: Do not set the date between 9:00
P.M. and 1:00 A.M. Otherwise, the date
may not change properly on the following
day. If it is necessary to set the date dur-
ing that time period, first change the time
to any time outside it, then set the date
and then reset to the correct time.
All manuals and user guides at all-guides.com
TWO-EYE MULTI-FUNCTION MODELS
1. Second Hand
2. Day Hand
3. Date Hand
TO SET THE DAY (OF THE WEEK):
1. Pull crown out to second click position C.
2. Turn crown clockwise to set day.
3. Push crown back to position A.
NOTE: The Day Hand will move together
with the Hour Hand and Minute Hand.
Keep turning the crown until the desired
day has been reached.
TO SET THE TIME:
1. Pull crown out to second click position C.
2. Turn crown to set time.
3. Push crown back to position A.
TO SET THE DATE:
1. Pull crown out to first click position B.
2. Turn crown counter-clockwise to set date.
3. Push crown back to position A.
NOTE: Do not set the date between 9:00
P.M. and 1:00 A.M. Otherwise, the date
may not change properly on the following
day. If it is necessary to set the date dur-
ing that time period, first change the time
to any time outside it, then set the date
and then reset to the correct time.
1. Second Hand
2. Date Hand
3. 24 Hour Hand
TO SET THE TIME:
1. Pull crown out to second click position C.
2. Turn crown to set time.
3. Push crown back to position A.
NOTE: The 24 Hour Hand will also be set
during time setting.
TO SET THE DATE:
1. Pull crown out to first click position B.
2. Turn crown counter-clockwise to set
date.
3. Push crown back to position A.
NOTE: Do not set the date between 9:00
P.M. and 1:00 A.M. Otherwise, the date
may not change properly on the following
day. If it is necessary to set the date dur-
ing that time period, first change the time
to any time outside it, then set the date
and then reset to the correct time.
THREE-EYE MULTI-FUNCTION MODELS
1. Hour Hand
2. Minute Hand
3. Second Hand
4. Date Hand
5. Day Hand
6. 24 Hour Hand
TO SET THE DAY (OF THE WEEK):
1. Pull crown out to second click position C.
2. Turn crown clockwise to set day.
3. Push crown back to position A.
ENGLISH
NOTE: The Day Hand will move together
with the Hour Hand and Minute Hand.
Keep turning the crown until the desired
day has been reached.
TO SET THE TIME:
1. Pull crown out to second click position C.
2. Turn crown to set time.
3. Push crown back to position A.
NOTE: The 24 Hour Hand will also be set
during time setting.
TO SET THE DATE:
1. Pull crown out to first click position B.
2. Turn crown either clockwise or
counter-clockwise to set date.
3. Push crown back to position A.
NOTE: The direction of crown turning
for date setting varies on different watch
models.
NOTE: Do not set the date between 9:00
P.M. and 1:00 A.M. Otherwise, the date
may not change prop e rly on the following
day. If it is necessary to set the date dur-
ing that time period, first change the time
to any time outside it, then set the date
and then reset to the correct time.
THREE-EYE CHRONOGRAPH MODELS
1. Hour Hand
2. Minute Hand
3. Second Hand
4. 24 Hour Hand
5. Chronograph Minute Hand
6. Chronograph Second Hand
7. Date Indicator
S1 – Chronograph start/stop button
S2 – Chronograph reset button
TO ADJUST THE CHRONOGRAPH HANDS
POSITION:
Before setting the time, check if the Chro-
nograph Second Hand and Chronograph
Minute Hand are at the zero position.
If the chronograph is in use, press the
button in the following order to reset it,
and then check if the chro n ograph hands
have returned to zero position.
If the chronograph is counting: S1 S2
If the chronograph is stopped: S2
In case one or several chronograph hands
are not at the zero position due to certain
reasons (e.g. following a battery change),
that needs to be adjusted.
1. Pull crown out to second click position C.
2. Press S1 button to set the Chronograph
Second Hand. Holding down the button
will allow quick advance.
3. Push crown back to position A.
TO SET THE TIME:
1. Pull crown out to second click position C.
2. Turn crown to set time.
3. Push crown back to position A.
NOTE: The 24 Hour Hand will also be set
during time setting.
TO SET THE DATE:
1. Pull crown out to first click position B.
2. Turn crown counter-clockwise to set
date.
3. Push crown back to position A.
NOTE: Do not set the date between 9:00
P.M. and 1:00 A.M. Otherwise, the date
may not change properly on the following
day. If it is necessary to set the date dur-
ing that time period, first change the time

Werbung

loading

Inhaltszusammenfassung für Freestyle FS81230

  • Seite 5 DEUTSCH All manuals and user guides at all-guides.com ANWEISUNGEN ZUR ansonsten wird das Datum am folgenden ZEIT EINSTELLEN: Tag nicht richtig angezeigt. Falls das 1. Ziehen Sie die Krone bis zum zweiten ANALOGEN Datum zwischen 21:00 Uhr und 1:00 Uhr Klicken heraus, Position „C“. eingestellt werden muss, stellen Sie bitte 2. Drehen Sie die Krone bis die korrekte QUARTZUHR erst eine neue Uhrzeit ein (nicht zwischen Zeit angezeigt wird. 21:00 und 1:00 Uhr), stellen Sie dann das 3. Drücken Sie die Krone wieder auf Datum ein und stellen Sie abschliessend Position „A“ ein. ZWEI- ODER DREI-ZEIGER MODELLE wieder die korrekte Uhrzeit ein. HINWEIS: Der 24-Stundenzeiger wird DATUM EINSTELLEN: gleichzeitig mit eingestellt. 1. Ziehen Sie die Krone bis zum ersten Klick heraus, Position „B“. DATUM EINSTELLEN: 2. Drehen Sie die Krone gegen dem 1. Ziehen Sie die Krone bis zum ersten Uhrzeigersinn um das Datum...
  • Seite 6 HINWEIS: Stellen Sie das Datum nicht 21:00 und 1:00 Uhr), stellen Sie dann das zwischen 21:00 Uhr und 1:00 Uhr ein, ansonsten wird das Datum am folgenden Datum ein und stellen Sie abschliessend Tag nicht richtig angezeigt. Falls das wieder die korrekte Uhrzeit ein. Datum in dieser Zeit eingestellt werden ZEITMESSUNG MIT DEM muss, stellen Sie bitte erst eine neue CHRONOGRAPHEN (STOPPUHR): Uhrzeit ein, stellen Sie dann das Datum ein und stellen Sie abschließend wieder 1. Drücken Sie Taste S1 um die Zeitmessung zu starten. die korrekte Uhrzeit ein 2. Drücken Sie S1 noch einmal um die ZEITMESSUNG MIT DEM CHRONOGRA- Zeitmessung zu stoppen. Drücken PHEN (STOPPUHR): Sie S1 noch einmal um ab der letzten Diese Freestyle-Gebrauchsanweisung Messung weiter zu messen. Um die abgelaufene Zeit zu messen: wurde mit Tinte auf Sojabasis auf 3. Um den Chronographen zurück- 1. Drücken Sie Taste S1 um die Zeitmes Recycling-Papier gedruckt um den zusetzen, drücken Sie Taste S1 um die sung zu starten. Kohleausstoß zu reduzieren.