swing2sleep Gestell Montageanleitung Seite 6

2.
4x
1
3.
4.
Stick an anti-slip pad on each adjustable foot. Then screw one
adjustable foot firmly into the threads.
Now turn the bracket parts over and place them on the feet. Next, take the
firmly connected brackets and turn them vertically upwards so that the
brackets are facing upwards with the opening. The caps must now be pla-
ced on the tube openings on the lower brackets (depending on the frame,
these may already be in place). The grub screws on the underside must
now be tightened again using the Hex key
3
2
EN
4