Installation; Connection Cable; Built-In Appliances - AEG HK854420XB Benutzerinformation

36 www.aeg.com
Make sure, you operated the appliance
correctly. If not the servicing by a cus-
tomer service technician or dealer will
not be free of charge, also during the

8. INSTALLATION

WARNING!
Refer to the Safety chapters.
Before the installation
Before the installation of the appliance,
record the information below from the
rating plate. The rating plate is on the
bottom of the appliance casing.
• Model ...........................
• PNC .............................
• Serial number ....................

8.1 Built-in appliances

• Only use the built-in appliances after
you assemble the appliance into cor-
8.3 Assembly
B
< 20 mm
A
12 mm
28 mm
38 mm
min.
500mm
A
min. 500 mm
B
57 mm
41 mm
31 mm
warranty period. The instructions about
the customer service and conditions of
guarantee are in the guarantee booklet.
rect built-in units and work surfaces
that align to the standards.

8.2 Connection cable

• The appliance is supplied with the
connection cable.
• Replace the damaged mains cable
with a special cable (type H05BB-F
Tmax 90°C; or higher). Speak to your
local Service Centre.
min.
50mm
min.
2mm
min. 2 mm
> 20 mm
min
30 mm
A
12 mm
28 mm
38 mm
A
B
min. 500 mm
B
57 mm
41 mm
31 mm
min. 2 mm