Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Using the Drive
Installing/Removing a Device
Refer to the Reference Manual included with your computer on how to install/remove the
drive.
CAUTION
Be sure to turn the computer off before installing/removing the drive.
—_
—
ULB)
Confirm the following contents in [Start] - [Settings] - [Control Panel] - [System] - [Device
Manager] - [CDROM] - [MATSHITA UJDA*** DVD/CDRW] - [Settings]. Make the set-
tings if they have not yet been made.
* Add a check mark for [DMA].
* Set both [Start drive letter] and [End drive letter] in [Reserved drive letters] to [L:].
qWindows}2000)
Confirm that [Transfer Mode] is set to [DMA if available] in [Control Panel] - [System] -
[Hardware] - [Device Manager] - [IDE ATA/ATAPI controllers] - [Secondary IDE Chan-
nel} - [Advanced Settings] - [Device 0]. Perform this setting if it has not yet been made.
Werbung
