Useful Information - Rodcraft Rc2203 Bedienungsanleitung

Safety Information
Workplace hazards
• Slip/Trip/Fall is a major cause of serious injury or death.
Be aware of excess hose left on the walking or work sur-
face.
• Avoid inhaling dust or fumes or handling debris from the
work process which can cause ill health (for example,
cancer, birth defects, asthma and/or dermatitis). Use dust
extraction and wear respiratory protective equipment
when working with materials which produce airborne
particles.
• Some dust created by power sanding, sawing, grinding,
drilling and other construction activities contains chemi-
cals known to the State of California to cause cancer and
birth defects or other reproductive harm. Some examples
of these chemicals are:
• Lead from lead based paints
• Crystalline silica bricks and cement and other ma-
sonry products
• Arsenic and chromium from chemically-treated rub-
ber
Your risk from these exposures varies, depending on how
often you do this type of work. To reduce your exposure
to these chemicals: work in a well ventilated area, and
work with approved safety equipment, such as dust
masks that are specially designed to filter out microscopic
particles.
• Proceed with care in unfamiliar surroundings. Be aware
of potential hazards created by your work activity. This
tool is not insulated from coming into contact with elec-
tric power sources.
• This tool is not recommended for use in potentially ex-
plosive atmospheres.
Additional safety information regarding portable air
tools:
• CAGI 2528 - B186.1, SAFETY CODE FOR POR-
TABLE AIR TOOLS, available from Global Engi-
neering Documents at https://global.ihs.com/ or call
+1 800 447-2273. In case of difficulty in obtaining
ANSI standards, contact ANSI via https://
www.ansi.org/
Intended Use
This product is designed for installing and removing threaded
fasteners in wood, metal or plastic. Indoor use only.
No other use permitted.
The use of spare parts or accessories other than those origi-
nally supplied by the manufacturer may result in a drop in
performance and in an increased maintenance, noise level or
vibrations, and as a result, the full cancellation of the manu-
facturer's liability.
Product Specific Instructions
Operation
See figures on page .
• Fix the accessories properly to the tool.
8
• Connect device to a clean and dry air supply.
• Before each use, Check if the socket is correctly held by
the retaining ring. If not, the retaining ring must be re-
placed.
• To start the tool, use the trigger (A). Machine speed is in-
crease by increasing pressure on the trigger. Release the
trigger to stop.
• To switch rotation, use the switch (B).
• To adjust output power in forward, use the regulator (C).
Lubrication
Use an air line lubricator with SAE #10 oil, adjusted to two
(2) drops per minute.
Maintenance instructions
• Follow the environmental regulations of the local
country for safe handling and disposal of all compo-
nents.
• Maintenance and repair work must be carried out by qual-
ified personnel by using only original spare parts. Contact
the manufacturer or your nearest authorized dealer for ad-
vice on technical service or if you require spare parts.
• Always ensure that the machine is disconnected from en-
ergy source to avoid accidental operation.
• Disassemble and inspect the tool every three 3 months
(500 hours) if the tool is used every day. Replace dam-
aged or worn parts.
• To keep downtime to a minimum, the following service
kit is recommended: Tune-up kit
Disposal
• The disposal of this equipment must follow the legisla-
tion of the respective country.
• All damaged, badly worn or improperly functioning de-
vices MUST BE TAKEN OUT OF OPERATION.
• The disposal of this equipment must follow the legisla-
tion of the respective country.
• Repair works should be done only by the technical main-
tenance staff.

Useful Information

Country of origin
China
Website
Information concerning our Products, Accessories, Spare
Parts and Published Matters can be found on the Rodcraft
website.
Please visit: www.rodcraft.com.
© Rodcraft - 8956001943
Impact Wrench