Showlite SL017 Kurzanleitung

Article no.: 00024240 SL017 Stage Spot 1000W Fresnelscheinwerfer
Introduction
Thank you for choosing this Stage Spot. Prior to use, we suggest that you carefully read all of the
instructions. By following the instructions found in this user manual, you can look forward to
exceptional performance from your Stage Spot for years to come. Please follow these operation,
safety and maintenance instructions to ensure along and safe life for your Stage Spot. With a
screw on the backside of the Stage Spot you can adjust the beam angle.
Precautions
1) Read these instructions before operating the unit.
2) Please heed all safety warnings and keep these instructions for
future reference. Follow all instructions.
3) Do not use this device near water or moisture.
4) Clean only with dry cloth.
5) Do not install near any heat sources such as radiators, heat
registers, stoves, or other devices that produce heat.
Please installing the lamp in the ventilated place that the ambient temperature
is lower than 40°C.
6) Only use accessories specified by the manufacturer.
7) Do not open the device
8) Before installing or replacing the lamp (refer to the circuit figure), please cut
off the power supply. Screw out the screw of the front panel that fastened
the lamp, and installing the lamp. When operating the fixture, the minimum
distance between the fixture surface and the flammable object must be more
than one meter. The light fixture skin temperature is up to 200 °C.
9) Refer all servicing to qualified service personnel. Servicing is
required when the device has been damaged in any way, such
as liquid has been spilled or objects have fallen into the device,
the machine was exposed to rain or moisture, does not operate
normally, or has been dropped.
Specifications:
Stage Spot Light: Showlite SL017 Stage Spot 1000W Fresnelscheinwerfer
Power supply: 100-240V/AC, 50/60Hz
Power consumption: 1000W
Operating temperature: < 40°C
Dimensions: 390 (L) x 210 (W) x 250 (H) mm
Weight: 5.7kg
Accessories: 00024241 Showlite SL038 Torblende für SL017 Scheinwerfer
(for sale)
Ver072015
INSTALLATION
The Showlite CPR-60 LED Profilscheinwerfer is designed for overhead rigging on stages, in
discotheques, theatres, etc. During installation consider all necessary safety instructions
especially EN 60598-2-17 and national standards. Please note: for overhead rigging in
public or industrial areas, a series of safety instructions have to be considered. This manual
can only give a survey and does not list complete instructions. Installation must only be
done by authorized and experienced operators.
Overhead rigging
Important! Overhead rigging must only be done by authorized and experienced
operators. Always install an appropriate safety bond.
You must only use safety bonds and quick links complying with DIN 56927, shakles
complying with DIN EN 1677-1 and BGV C1 carbines. All devices must be sufficiently
dimensioned and used correctly in accordance to the latest industrial safety regulations.
The installation of the device has to be built and constructed in a way that it can hold 10
times the weight for 1 hour without any harming deformation.
The maximum drop distance must never exceed 20 cm.
A safety bond which already held the strain of a crash or which is defective must not be
used again.
Your product is designed and manufactured with materials and components of high quality, which are recyclable
and can be reused. The symbol means that your product should be disposed of separately from household
waste when it reaches its end of life. Please dispose of this equipment at your local collection point or recycling
center. Please help to protect the environment in which we all live.
All specifications and appearances are subject to change without notice. All information was correct at time of
printing. Musikhaus Kirstein GmbH does not guarantee for the accuracy or completeness of any description,
photograph or statement contained in this manual. Printed colors and specifications may vary slightly from
product. Products from Musikhaus Kirstein GmbH are only sold through authorized dealer. Distributors and
dealers are not agents of Musikhaus Kirstein GmbH and have no authority to bind Musikhaus Kirstein GmbH
legally in any way. This manual is protected by copyright. Any copying or reprint, even in excerpts, is only
allowed with written consent of Musikhaus Kirstein GmbH. The same applies to reproduction or copying of
images, even in altered form.
Musikhaus Kirstein GmbH
Bernbeurener Strasse 11
86959 Schongau / Germany
Phone 0049-8861-909494-0 / Fax 0049-909494-19