Indicators' Description; Bluetooth Connection - HiFuture Fusion Benutzerhandbuch

Indicators' Description

Earbuds
Power on: LED flashes white for two seconds
•
Power off: LED flashes red for one seconds
•
Pairing: Led flashes red and white alternatively
•
Connected: LED is off
•
Low battery: LED flashes red for sixty seconds once.
•
Fully charged: LED is off
•
Charging case, not being charged
Low battery: LED flashes red three times when the power is between 1-20%.
•
Earbuds are inserted for charging: LED flashes red quickly when the power is
•
between 1-20% and green when it is between 21-100%.
Charging case while being charged
Charging: The indicator light on the charging case flashes.
•
Fully charged: Green LED is always on
•
Tap Control
Play / Pause
Previous / Next track
Volume up / down
Activate voice assistant
Answer a call
Reject / End a call
Low latency mode
ANC mode

Bluetooth Connection

To connect the earbuds to your phone, follow these simple steps. Power on the earbuds
and enable Bluetooth on your device. Next, select 'HiFuture Fusion' from the list of
available Bluetooth devices. After connecting, a voice prompt will confirm the
connection with the message 'You are Connected to Fusion'. The indicator will then turn
off automatically.
Press left/right tap area once.
Press and hold left/right tap area for two seconds.
Press left/right tap area twice.
Press left/right tap area three times.
Press left/right tap area twice.
Press and hold left/right tap area for two seconds.
Press left tap area four times.
Press right tap area four times.
6