Introduction; Intended Use; Scope Of Delivery; Equipment - Parkside Pdwe 8 C3 Originalbetriebsanleitung

AIR FILTER REGULATOR & LUBRICATOR PDWE 8 C3

1. Introduction

Congratulations on the purchase of your new ap-
pliance. You have chosen a high-quality product.
The operating instructions are an integral part of this
product. It contains important instructions for safety,
use and disposal. Familiarise yourself with all oper-
ating and safety instructions before using the prod-
uct. Only use the product as described and for the
specified areas of application. Hand over all docu-
ments when passing the product on to third parties.

1.1 Intended Use

This unit is used to lubricate the compressed air for
pneumatic tools and filters condensate from the
compressed air during this process. Do not use this
compressed air maintenance unit in explosive envi-
ronments. Avoid working in environments where sub-
stances such as flammable gases, liquids and paint
and dust mists are present. Any other use or modi-
fication of the unit is considered improper, involves
considerable risk of accident and is also not per-
mitted. We accept no liability for damage resulting
from improper use. The unit is intended for private
use only and may not be used for commercial or
industrial purposes.

1.2 Scope of Delivery

1 Air Filter Regulator & Lubricator including
connections
2 Mounting screws
2 Dowels
1 Instruction manual
6 GB/IE/NI/CY/MT

1.3 Equipment

1 Compressed air regulator
2 Wall bracket
3 Oil refill inlet
4 Oil passage screw
5 Quick coupling
6 Locking ring
7 Container for compressed air oil
8 Drain valve
9 Condensate collector
Filter insert
10
Compressed air manometer
11
1/4" plug nipple (pre-assembled)
12
Oil fogger unit
13
Filter unit
14
Mounting screws
15
Dowels
16

1.4 Technical Data

Working pressure: max. 8 bar
Explanations of all symbols
WARNING
WARNING!
Read the operating instruc-
tions before commissioning.
Wear eye protection
Wear respiratory protection
Wear hearing protection
Wear protective gloves