HomeMatic IP HmIP-SWDM-2 Montage- Und Bedienungsanleitung Seite 51

1x long green
lighting
1x long red
lighting
Short orange
flashing
(every 10 s)
Fast orange
flashing
Short orange
lighting (after
green or red
confirmation)
Long and
short orange
flashing (alter-
nating)
Transmission
confirmed
Transmission
failed or duty
cycle limit is
reached
Pairing mode
active
Pairing mode
active
Batteries
empty
Update of de-
vice software
(OTAU)
Troubleshooting
You can continue
operation.
Please try again (see
sec. "7.2 Command
not confirmed" on
page 49 or "7.3 Duty
cycle" on page 50).
Please enter the last
four numbers of the
device serial number
to confirm (see "5.1
Pairing" on page
39).
Activate the pairing
mode of the device
you want to connect
("5.1.1 Direct pairing
with a Homematic
IP device" on page
40).
Replace the batteries
of the device (see "6
Replacing batteries"
on page 47).
Wait until the update
is completed.
51