HomeMatic IP HmIP-SWDM-2 Montage- Und Bedienungsanleitung Seite 43

You can manually start the pairing mode for an-
other 3 minutes by pressing the system button (C)
shortly (see figure 4).
• Your device will automatically appear in the
Homematic IP app.
• To confirm, please enter the last four digits of the
device number (SGTIN) in your app or scan the
QR code. Therefore, please see the sticker sup-
plied or attached to the device.
• Wait until add is completed.
• If adding was successful, the LED (C) lights up
green. The device is now ready for use.
If the LED lights up red, please try again.
• Select, in which application (e.g. climate control
and/or security) you would like to use the device.
• In the app, give the device a name and allocate
it to a room.
Start-up
43