Troubleshooting - Baxall ZTX3 Installations- Und Betriebsanweisungen

Trouble Shooting
Controls Reversed : If left and right, etc. are reversed on your ZTX, this is usually
due to incorrect receiver wiring, see the receiver instructions.
Picture Tearing : If the picture 'tears' at the top when you use a caption generator or
multiplexer with built in caption generator. This may be caused by the old style
coaxial telemetry. If you have a ZR-mini or more recent receiver then changing to the
new style telemetry may remedy this. This places the telemetry information in the
blanking period of the video signal instead of continuously across the whole frame.
ZTX3 and ZTX4 Specifications
All video
Telemetry Signal
Control Functions
ZTX4 Auxiliaries
ZTX3 Auxiliaries
Power Consumption
Power Supply Units
Dimensions
Temperature limits
Page 8
1 V pk-pk composite via 75ohm coaxial cable with BNC
connectors. Camera input has switchable 75ohm termination.
ZTX3 and ZTX4 Baxall Coaxial Telemetry. ZTX4 also has
20mA twisted-pair All telemetry is as defined by Baxall
Telemetry Specification
Pan and Tilt, Focus and Zoom (Iris, ZTX4 only)
Latching Auxiliaries with LED indicator
AUX 1 (Camera power), AUX 3 (Auto-Pan), AUX 5
(Lamps), AUX 6 (Wipe), Momentary Auxiliary AUX 2
(Wash)
Latching AUX 1 with LED indicator, Latching AUX 3
(Auto-pan) with LED indicator
Maximum 2.4 VA Voltage range 12V DC +/-10%. Maximum
150 mA
230V AC +/-10% to +12V DC +/- 10% (class 2)
266 x 88 x 36.5 mm : Weight 0.6 kg : Material ABS endcaps
with aluminium and mild steel shell. Colour : Graphite grey,
blue lettering and keys
Operating
-10ºC to +50ºC at 10% to 80% relative humidity
(non-condensing)
Storage
-20ºC to +60ºC at 10% to 95% relative humidity
(non-condensing)