Electromagnetic Compatibility (Emc) - Baxall ZTX3 Installations- Und Betriebsanweisungen

For Safety
Please read these instructions as you install your ZTX and have them available during
the life-time of your ZTX, passing them on to subsequent users. If you have any
problems contact your Baxall agent.
WARNING : Installation is only to be carried out by competent, qualified
and experienced personnel
CAUTION : Only use your ZTX with a class 2 power supply. Do not use
the power supply provided for any other purpose.
Your ZTX is designed for use in general purpose CCTV applications. It must not be
used in medical and/or intrinsically safe applications.
Do not exceed the voltage and temperature limits given in the specifications. Only use
your ZTX in a clean, dry, dust-free environment

Electromagnetic Compatibility (EMC)

CAUTION : This is a Class A product. In a domestic environment this
product may cause radio interference in which case the user may be
required to take adequate measures.
This product is intended for use in general purpose CCTV applications in a
residential, commercial or light industrial EMC environment, refer to your Baxall
agent before using the product in an industrial EMC environment.
The product must be installed in accordance with good installation practice for EMC
to enable the product to function as intended and to prevent EMC problems.
Contact your Baxall agent to obtain a specification defining the acceptable levels of
product degradation with regard to EMC immunity.
MANUFACTURER'S DECLARATION OF CONFORMANCE
The manufacturer declares that the ZTX supplied with this manual is compliant with
the essential protection requirements of the EMC directive 89/336 and is tested to the
requirements of standards EN 55022 for emissions and IEC801 parts 2, 3 and 4 for
immunity. The product has been approved in accordance with TCF95/10/02.
Unpacking
Keep the packaging in case your ZTX needs to be stored for a time or returned for
whatever reason. The packaging should contain:-
• Your ZTX3 or ZTX4
• A socket mounted +12V power supply
• These instructions
If any of these items is missing or damaged then contact the suppliers and carriers
immediately, and do not attempt to use your ZTX.
Page 3