Römer BABY-SAFE Gebrauchsanleitung

Instruction
In order to protect your baby correctly,
the
means be used and installed as
described in these instructions.
!
!
!
How to install the baby seat using the
aircraft seat's safety belt:
ø
ø
ø
ø
ø ø
Removal:
ø
ø
Take your baby out of the baby seat as
often as possible to relieve its spine. For
„
babies under 4 months use the baby
beds provided by the airlines outside the
starting and landing times.
RÖMER BABY-SAFE
The child seat must only be
installed on a passenger seat
which.....
has been approved by the airline for
that purpose
faces the flight direction
is not equipped with an airbag.
Danger! An airbag acting onto the
baby seat may severely injure or even
kill your child.
Place the baby seat opposite to the
flight direction onto the passenger
seat.
Ensure that the carry handle is in the
topmost position.
Place the safety belt into both light
blue belt guides.
Close the safety belt (refer to the
safety instructions by the airline)
Tighten the safety belt by pulling the
belt end.
Caution! The buckle of the safety belt
must under no circumstances lie
within the light blue belt guides.
Open the safety belt of the passenger
seat (refer to the safety instructions by
the airline)
Now you can take the baby seat from
the passenger seat.
RÖMER
Instructions
Capture 3 - Securing your child
must by any
BABY-SAFE
For the protection of all
passengers
! The child seat must always be
secured in the plane, even
when not occupied by the child.
!
Your child must be buckled up
in the seat when the "fasten
seat belts" light comes on.
!
During an emergency
evacuation take your child out
of the child seat and go to one
of the emergency exits
immediately.