Hama 00057111 Anleitung Seite 7

6. If the installation is successful, the system reboots to
activate the driver.
7. Once the system is rebooted, the system recognizes
the USB speaker and displays it below on the right in
the task bar. (Xear USB)
8. The hardware speed and conversion quality must be
ideally set for good sound quality.
9. If the operating system does not automatically switch
to the new USB audio device, you must do so manually
in the control panel under sounds and audio devices.
See the screenshot below. Please set the USB audio
device in the Standard device field and click apply.
10. The Xear USB driver must be activated to use the
surround function. This is usually done automatically. If
this is not the case, activate the driver in the control
panel by double-clicking the icon.
Once you have clicked the icon, the Xear
should appear below to the right in the taskbar
(see point 7).
USB icon