Self-Cleaning Function; Cleaning And Maintenance - Zeegma Ironee Bedienungsanleitung

CORDLESS IRONING
To use the device in the cordless version, press the wireless base button (L,
Figure A), and then remove the device from the base.
STEPS TO FOLLOW AFTER EACH USE
1. Turn off the iron and unplug it from the power source.
2. Wait for the iron to cool down before storing it. Empty the iron. Do not
store the iron with water inside.
3. Always store the iron vertically to protect the iron plate from scratches,
corrosion or stains.
4. For cordless use: always place the iron on the stand to protect the iron
plate from scratches, corrosion or stains. Proper placement of the iron
on the stand will signal a click.

SELF-CLEANING FUNCTION

It is recommended to use the self-cleaning function on average once a month
or more often, depending on the frequency of use. To use the function:
1. Fill the water tank halfway.
2. Set the iron on the base.
3. Set the temperature control knob to MAX.
4. Connect the iron to a power source.
5. Allow the iron to heat up until the indicator light turns off.
6. Disconnect the iron from the power source.
7. Hold the iron horizontally over the sink.
8. Set the steam control knob to the "Self clean" position. Boiling water and
steam will now begin to come out of the holes in the iron plate.
Note! Hold down the knob until the self-cleaning function is complete.
9. Move the iron back and forth while steam and water are coming out of
it. Continue until the water tank is basically empty.
10. Turn the steam control knob to the "0" position (fig. 1).
11. Connect the iron to a power source.
12. Set the temperature knob to the MAX position. Let the iron heat up
again. The remaining water in the steam chamber will now evaporate
and leave the iron through the plate.
13. To clean the iron plate, it is recommended to iron a piece of old fabric.

CLEANING AND MAINTENANCE

• After the iron is unplugged and cooled down, simply wipe it with a damp
cloth, and if necessary, use a mild detergent.
• Never use harsh cleaning agents.
• Starch and other deposits can be easily removed from the iron plate by
wiping it with a damp cloth.
EN