Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Read the entire instruction manual.
Operation
1. Make sure that the inflatable pool toy is laid on a level surface free from stones and
sharp objects.
2. Only use a foot pump or hand pump to inflate the pool toy.
Note: Do not use compressed air; the pool toy cannot withstand high pressures.
3. Make sure that all the valves are properly closed after inflation.
4. To deflate the pool toy, pinch the valve to open the non-return valve. The valve can
be kept open with a thin (not sharp) object. Be careful not to damage the pool toy.
Care and maintenance
If the pool toy is not to be used for a long time
•
Make sure that it is clean and dry.
•
Store it in a dark and cool place, but no cooler than +5 ºC.
•
Make sure that pool toy cannot be damaged by any sharp objects.
Small holes can be repaired using the provided patch
1. Localise the leak.
2. Drain the pool toy of air.
3. Clean the area around the leak and make sure it is dry.
4. Cut the repair patch to the correct size and press it over the hole.
5. Allow the repair to dry for 24 hours before using the pool toy again.
6. If the puncture/hole is larger than 2.5 cm (1 inch), use a silicon- or rubber-based
adhesive to apply the supplied or other suitable repair patch over the hole.
Read the instructions on the adhesive and make sure it is suitable for inflatable
pool toys.
Responsible disposal
This symbol indicates that this product should not be disposed of with general
household waste. This applies throughout the entire EU. In order to prevent
any harm to the environment or health hazards caused by incorrect waste
disposal, the product must be handed in for recycling so that the material can
be disposed of in a responsible manner. When recycling your product, take
it to your local collection facility or contact the place of purchase. They will
ensure that the product is disposed of in an environmentally sound manner.
Specifications
Size
196 × 110 cm
Age limit
3 years
English
3
Werbung
