Aux Connection; Usb Connection - Ashdown Engineering Betty Bedienungsanleitung

ASHDOWN ENGINEERING - BETTY
3. Once BT is successfully connected, the BT connection can be terminated by
pressing the button for 3 seconds.
FM RADIO -
1. After BETTY is turned on, switch to FM mode by pressing the
the AUX audio cable, this will act as an antenna.
2. In FM mode, if the button is pressed, the radio indicator will flash an
automatically search for radio stations. Once a radio station is selected, the indicator
light will remain on.

USB CONNECTION -

1. Once powered on, insert the USB drive into the USB interface which is located at
the back.
2. BETTY will automatically switch to USB mode and start playing.
3. USB mode supports the following audio formats:
- MP3
- WAV
- FLAC
- APE
USER GUIDE
ASHDOWN ENGINEERING - BETTY

AUX CONNECTION -

1. Once BETTY has powered on, insert one end of the 3.5 audio cable into the AUX
interface on the back of the unit and press the
on.
button and insert
2. Then, insert the other end of the audio cable into your chosen device.
3. Once the AUX has successfully connected, if you need to use another mode you
can press the
button again to switch back to AUX mode.
button until the AUX indicator is
button briefly to switch to other modes and then press the
USER GUIDE