Top Panel Controls - Ashdown Engineering Betty Bedienungsanleitung

ASHDOWN ENGINEERING - BETTY
INTRODUCTION
As seen on major stages across the world with some of the biggest and most
famous bands of our time, the status of the Ashdown Bass Amp rig has firmly
secured its place in "Rock 'n' Roll" history. Setting the stage since '97, Ashdown
have been dedicated to providing bassists with the best possible tone, on
stage in the studio and now at home.
The Ashdown story began back 1997, but this certainly wasn't a new venture
for company founder Mark Gooday. Having previously been managing
director of industry giants Trace Elliot for the 12 years prior to forming
Ashdown, Mark was already somewhat of a bass amp pioneer. You could
say that Bass was in his blood. Mark's natural eye for design and enormous
attention to detail in terms of bass tone has helped to establish Ashdown as
the world's leading amplifiers on the market.
Bass requires far more attention to replicate in sound than that of guitar based
products, covering a far broader spectrum of frequencies, bass has always
been about clarity.
The Ashdown Elizabeth Line encompasses all of what we have learnt about
sound, from working with some of the worlds most admirable musicians and
engineers. The Ashdown Elizabeth Line delivers in style, sound and features.
Enjoy high quality audio from the optional inputs including optical, USB and
auxiliary jack. As well as wirelessly via BT through the impeccable ACS chip set
used on board.
USER GUIDE
ASHDOWN ENGINEERING - BETTY

TOP PANEL CONTROLS

POWERING ON AND CHARGING -
1. Power On: Long press
indicators will light up.
2. Power Off: Long press
turn off.
3. Charging: Plug in the adapter, the CHARGE indicator will then light up. Betty will
then start charging. Once fully charged, the CHARGE light will turn off.
BT CONNECTION -
1. Power On, the BT indicator will automatically start flashing.
2. Turn on the BT on your device and select BETTY in your BT menu. When the
connection is successful, the BT indicator will remain on.
button for 3 seconds to power on. The POWER and BT
button for 3 seconds. The POWER indicator will then
USER GUIDE