Herunterladen Inhalt Inhalt Diese Seite drucken

Seco FS – 100.2 Bedienungsanleitung Seite 8

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

ES STATEMENT OF COMPLIANCE
pursuant to: Council Directive No. 2006/42/EC (Government directive NV 176/2008 Coll.)
A. We: Seco Group a.s., Šaldova 408/30, Prague 8
branch: 02 Jičín, Jungmannova 11
Corporate number: 60193450
B. Mechanical equipment
- name: Snow thrower
- type: FS 100, FS 100.2
- serial number:
Description:
The snow thrower consists of a twin-screw auger in the middle of which there are throwing blades, snow
guiding areas with an adjustable defl ector, an adjustable slipper on the universal hitch assembly (for
aggregation with the motorised lawnmower AJ 102 or AG 122) and a drive mechanism using wedge shafts.
The snow thrower is equipped with a rotor. An additional ballast is hung on to the grass catcher hitch (on
the drive unit) to apply an extra load to the rear axle.
C. Legislation forming the basis for assessment of compliance:
ČSN EN ISO 12100-2, ČSN EN ISO 11201, ČSN EN 1032. ČSN EN 1033
D. Assessment of compliance was performed according to the designated procedure in:
- Council Directive No. 2006/42/EC, Article 12, attachment VIII, (eqv. § 5, attachment no. 8, NV No.
176/2008 Coll.)
E. We confi rm that:
- this mechanical equipment defi ned above complies with the requirements in the above technical regulations
and under normal operating conditions it is s a f e.
- measures have been taken to ensure the compliance of all products introduced to the market with the
technical documentation and the requirements contained in technical regulations.
F. Persons participating in the assessment of compliance:
Accredited testing laboratory no. 1054
Státní zkušebna zemědělských, lesnických a potravinářských strojů a.s.
Molákova 622/11, 163 04 Prague 8, Czech Republic
Final Report No. 25 749
Technical documentation in the extent as per attachment VII is held by the manufacturer at:
Seco GROUP
odštěpný závod 02 Jičín
Jungmannova 11
506 48 Jičín
In Jičín, on 1.10.2010.
issue the following statement:
year of manufacture: 2010
Ing. Jiří Pávek
Member of the Board of Directors
7

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis