Storage; Disposal; Ordering Replacement Parts - Seco FS – 100.2 Bedienungsanleitung

Pos. 7.1.
Put on the universal trailer's protective cover.
Remove the drive (see "Installation sheet — universal trailer).
Install and tense the mower's V-belt (see mowing tractor manual).
Lubricate the chain of the worm drive.
Remove the reflectors from the rear plate.
Attach the grass collection bin.
7. Using special equipment - snow chains, additional
weights
Use special equipment under extreme conditions (slippery surfaces, heavy snow, etc.).
Hang the weight carrier Pos.4 and weights Pos.5
• Pos. A – machine with 300 l grass
collector
• Pos. B – machine with 360 l grass
collector
Use the micro-switch Pos. 1 to secure the
attached spring Pos. 2

8. Storage

After the season is over, or if the adapter has not
been used for more than 30 days, the blower
should immediately be prepared for storage.
Recommended procedure:
Thoroughly clean and wash the adaptor.
Replace defective or worn parts and
tighten loosened connections.
Oil all lubrication sites.
Store the adapter covered in a clean
and dry environment.

9. Disposal

After the snow blower's useful life is over, the user must dispose of it. For this, you can deal with a waste
disposal company. Or you can perform the disposal yourself. In that case, we recommend the following
procedure:
• Dispose of your machine in keeping with applicable waste management law.
Disassemble the snow blower.
Separate the parts into those that do and do not endanger the environment (rubber, lubricants, etc.).
Environmentally harmful parts must be handled according to applicable waste disposal laws.
• The parts should be selected according to the applicable waste management catalogue and in accordance
with waste management law. Ecologically friendly waste shall be treated as reusable material.

10. Ordering replacement parts

Order replacement parts from your dealer or from a service facility that is up to date on current technical
changes.
6
300L GRASS COLLECTOR
300L GRASS COLLECTOR