SIZZIX Big Shot Kurzanleitung

Big Shot
TheSizzix@ Big ShotTMMachineis exactly what crafters have
been looking for a versatile, easy to use and affordable
multipurpose creative system. It is designedto cut and emboss
for creating unlimited fun projects. UsingSizzix OriginalsTM, Bigz
TM,Sizzlits@, Clearlit3TM, Embosslit3TM and FramelitsTM Dies, as
wellas TexturedImpressionsTM, TextureTradesTM, TextureFadesTM
Embossing Folders and TexturzTMTexture Plates, crafters can
nowexpresstheir creativity in minutes. Start unleashingthe
limitless possibilities of your Big Shot to create a combination of
dazz ing designs.
Assembly Instructions
Crank Shaft
Beforeattaching handle,removeprotective cap on crank shaft and
discard. Then attach handle by sliding washer over hex screw and
inserting through handle and into crank shaft. Tighten hex screw
with hexwrenchprovidedwith handlekit. Pressend plug overhex
screw until firrnly sealed.
Using a Sizzlits or Clearlits Die
paper
Die
Extended Multipurpose Platform
(Tab 1)
PlaceSizzlits Die onto a Cutting Padwith foam side up, Place
paperoverthe die. Place another Cutting Padoverthe paper to
create a "sandwich."For Clearlits Die,placedie over photo or
material so that the area to be cut shows through the die.
Thenplace photo or material and die betweenCutting Padsto
make sandwich.
Extended Multipurpose Platform
Placesandwichon ExtendedMultipurposePlatform and slide
2.
?latform into openingof BigShot. Note the rotation of the
handle and continue to rotate it in the same direction
?latforrn has passedthrough the openingand the rollers.Remove
Platform from Big Shot.Yourdie-cut shape is readyto use!
Washer
Hex Screw
End Plug
Handle
Protective Cap
Cutting
Pads
"Sandwich"
until the
Using Originals, Bigz or Bigz XL Dies
Cutting Pad
Cutting pad
Place an Originals or Sigz Die on a Cutting Pad with foam side
up. Place paperor desired material to be cut on top of the die.
?lace the second Cutting Pador PremiumCreasePadon top of
the paperor material to create a "sandwich."
Bigz XL Dies require Extended Cutting Pads
(sold separately)
Slide the sandwich into the openingof the Big Shot. Note the
2.
rotation of the handle and continue
direction until the sandwichhas passed through the openingof
the rollers. Removethe sandwich from Big Shot. Your die-cut
shape is ready to use!
Using Textured Impressions,
Texture Fades, Texture Trades
Embossing Folders or Embosslits
Textured
Impressions
Embossing
Folder
Using a single
sheet of paper
With TexturedImpressions,Texture Fades,TextureTrades
Embossing Folderor Embosslits Die open,insert paper,foil or
other embossable material, then close like a book.
Textured
Impressions
Embossing
Folder
Extended Multipurpose Platform
(Tab1)
Place Cutting Pad above and belowthe closed Folder to
create a "sandwich."
Premium
Crease Pad
Die
Cutting
Dies with crease require
Premium Crease Pad
(sold separately)
"Sandwich"
to rotate it in the same
Dies
Llsing a
folded Card
Cutting
pads
Single Sheet
of Cardstock