Microdowell
Uninterruptible Power Supply
DEFINITIONS FOR ILLUMINATED LED INDICATORS
Power
Using
On
Battery
On
Off
Off
On
Off
On
Off
On/Off
Off
On/Off
Fuse
Alarm
Normal
Off
Normal
Two Beeps
Rapid
Normal
Beeps
Two beeps
Blown
or rapid
beeps
Normal/
Long Beep
Blown
- 9 -
Condition
Normal
Utility Failure- The UPS is providing battery power to
the Battery-Power Supplied outlets.
Utility Failure- The UPS is providing battery power.
The rapid beeps indicate the battery will run out of
charge within a few minutes.
Overload- Occurs in the Full-time Surge Protection
Outlets. Please turn the UPS off and unplug at least
one piece of equipment from the UPS. Replace the
fuse with a spare one then turn the UPS on.
Overload- Occurs in the Battery-power Supplied
Outlets. Turn the UPS off and unplug at least one
piece of equipment from the UPS. Check the fuse
and do the replacement if necessary. Turn the UPS
on.
LP500