Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Microdowell
Uninterruptible Power Supply
INSTALLING YOUR UPS SYSTEM
UNPACKING
Inspect the UPS upon receipt. The box should contain the following:
(1) UPS Unit; (1) Upseye Software CD-ROM; (1) Serial Interface Cable (DB-9); (1)
Telephone Cable; (2) Power Cord; (1) User Manual;
HARDWARE INSTALLATION GUIDE
1.
Connect the equipment to your UPS outlets.
The IEC to IEC power cords coming with the unit
are used to connect your computer and monitor
to the UPS the UPS. Items such as copiers, laser
printers, vacuums, space heaters, or other large
electrical devices should not be connected to the
UPS. Please make sure that the total loads of
your equipments are less than the maximum total
power load of your UPS.
2. Use your computer power cord to connect the UPS to a wall outlet. Please avoid using
extension cords and adapter plugs. (To maintain optimal battery charge, leave the UPS
plugged in at all times.)
3.
Press the UPS power button to turn it on. The
"Power On" indicator will be illuminated in "Green".
4.
Install your optional software and accessories. To use the software, simply connect the
enclosed serial interface cable to the serial port on the UPS and an open serial port on the
computer.
- 4 -
LP500
Werbung
