TMC SCREEN Bedienungsanleitung Seite 18

P 8555 / A3
E. HUD SETTINGS:
Since HUD receiving data from satellite,GPS data will be a little different with car dashboard data.At that time,you can
enter into menu setting to have a fine adjustment of HUD in order to get the same data as dashboard.If you find there is
something different with the the dashboard values,please make an adjustment as below:
Enter into the menu setting (there are 3 directions for wave button: up,vertical,down),vertical long press, enter the menu
setting,vertical short press 1 time , menu options will increase 1 unit,up and down the wave button to increase or decrease
the parameter value. After adjustment,vertical long press 5 seconds to return the previous interface.
Menu Functions
0 Speed
1
Speed
alarm
2
Brightness
3
Speed Unit
4 Mileage
unit
5 Multi
functions
switch
6 Timezone 0:00-12:00 Default timezone is France
7 Sleeping 0.0-15.0
voltage
Adjust Explanation
range
80-120 If HUD speed is different with
dashboard,short pull up or
pull down the button to
change
10-180 Default overspeed alarm
value is 150,can short pull up
or pull down the button to
change
0-2 0=automatic adjustment
1=darkest
2=brightest
0-1 0=KM/H
1=MPH
0-1 0=KM
1=Mile
0-5 Multi functions area:
0=Clock
1=Mileage
2=Trip time
3=Altitude
4=Battery voltage
5=Satellite numbers
winter time(GMT +1),it can be
changed according to the
users timezone
If HUD cannot power
off,change the voltage to
13.3V or higher
Default
value
107
150
0
0
0
2
1:00
13.2V
Display Status