HomeMatic HMIP-PS Bedienungsanleitung Seite 14

Hazard information
In the event of an error, please have the device
checked by an expert.
Do not use the device if there are signs of dam-
age to the housing, control elements or connect-
ing sockets, for example, or if it demonstrates a
malfunction. If you have any doubts, have the
device checked by an expert.
For safety and licensing reasons (CE), unauthor-
ized change and/or modification of the device is
not permitted.
The device may only be operated indoors and
must be protected from the effects of moisture,
vibrations, solar or other methods of heat radia-
tion, cold and mechanical loads.
The device is not a toy; do not allow children to
play with it. Do not leave packaging material lying
around, plastic films/bags, pieces of polystyrene
etc., can be dangerous in the hands of a child.
Please take the technical data (in particular the
maximum permissible switching capacity of the
relay and the type of load to be connected) into
account before connecting a load! All load data
relates to ohmic loads! Do not exceed the capac
26
ity specified for the device. Exceeding this capac-
ity could lead to the destruction of the device, to
a fire or to an electrical accident.
The device may only be connected to an easily
accessible power socket outlet. In case of danger,
disconnect the device from the power socket
outlet.
Only use the device with properly installed wall
outlets with earth contacts and not with multiple
socket outlets or extension cables.
Do not connect devices to the pluggable switch
which could cause fire or other types of damage
in unattended operation (e.g. irons).
Remove the plug of the connected device from
the switch, whenever you make changes or mod-
ifications to the device.
Always lay cables in such a way that they do not
become a risk to people and domestic animals.
The device has not been designed to support
safety disconnection. The load is not isolated
from the mains.
Hazard information
27