Setup Instruction - S-idee 761-5 Benutzerhandbuch

Charging Instruction

Setup Instruction

1. Install 4 AA batteries(not included) in
the transmitter.
3. Connect the battery to the receiver,
then stick the battery into the cabin.
1. Unplug the battery from your plane.
2. Carefully plug the charger into the USB
port on your computer or USB adapter.
3. Connect battery into the charger.
4. The charging process takes about 3
hours. For safety reasons, never charge
the battery for longer than 4 hours.
While charging, the red LED indicator will
the red LED will be off.
2. Plug the landing gears into the position
on the mainwing as shown above.
4. Setup is done. Make sure you read
and follow all instructions in this manual
3 / 11