Klipsch kmc1 Bedienungsanleitung

THANK YOU
Thank you for your purchase of the Klipsch ® Music Center kmc1!
The kmc1 combines legendary Klipsch technology with Bluetooth
and aptX ™ technology for truly hi-fidelity music playback from
your favorite music device. With a Bluetooth® connected phone
you can also conveniently answer, converse and terminate, or
ignore incoming calls, from the kmc1. Its contemporary styling
compliments any décor and you can take it almost anywhere with
both AC and battery-power options.
AC POWER
To operate on AC power first select the one plug adapter (3 total
supplied) that fits your AC outlet and insert into the supplied AC
adapter. Plug other end of the AC adapter into back of the kmc1
marked DC IN, then plug AC adaptor into a functioning wall socket.
On AC power, if no streaming or connected audio is detected for
one hour the kmc1 will automatically go into READY mode.
BATTERY POWER
The kmc1 has a built-in rechargeable lithium-ion battery capable
of up to 8 hours of playing time. ALLOW 8 HOURS OF INITIAL
®
CHARGE TIME BEFORE FIRST TIME BATTERY USE. Charging
occurs when kmc1 is plugged into active AC outlet. If charging
while kmc1 is off, VOLUME/BATTERY level indicator shows charg-
ing progress and indicator turns off when charging complete.
Pushing UTILITY button down with kmc1 on (other than during
a Bluetooth-connected phone call) will show current battery
strength. The kmc1 operates on battery power unless AC power
is utilized. On battery power, if no streaming or connected audio
is detected for five minutes, the kmc1 will automatically go into
READY mode. To put the unit back into ON mode simply press the
ON / READY button on top.
USB CHARGING
NOTE: The USB jack is only for CHARGING most music players,
phones, and tablets. Using the USB connection end of the charging
cable for your device (not included), connect to the USB input on
rear of the kmc1 to charge your device. You can charge your device
using either AC or battery power for the kmc1.
NOTE: Using the USB input to charge your device while the kmc1 is
on battery power will reduce battery life. If the battery in the kmc1
is too weak, the USB connection will not charge your device.
ILLUMINATED CONTROL FUNCTIONS
8
1 2
1. ON / READY - Tap to turn on. Hold to put in READY mode.
Solid Red indicates ON, flashes if batteries are weak
2. BLUETOOTH
Hold to Pair
No Connection
Tap to Exit
Hold to
Connected
Disconnect
3. VOLUME DOWN
7
3 4 5 6
4. VOLUME LEVEL / BATTERY LEVEL INDICATOR
5. VOLUME UP
6. UTILITY - Answer/Terminate or Ignore a phone call from a
Bluetooth-connected phone OR check battery level
7. SOURCE SELECT - Pressing + and – together toggles
between Bluetooth mode and AUX (3.5mm input) for playback
8. MUTE - Briefly push POWER ON/OFF and VOLUME DOWN
together to MUTE sound during music playback then
briefly push same two buttons together again to unmute
sound back to original level.