Herunterladen Inhalt Inhalt Diese Seite drucken

Declaration Of Conformity; Disposal Information; Exemption From Liability - Flex CA 18.0 Handbuch

Elektrowerkzeuge
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

440.183_Ladegerät CA 10.8.book Seite 10 Montag, 8. Februar 2016 3:00 15
Repairs
Repairs may be carried out by an authorised
customer service centre only.
Exploded drawings and spare-part lists can
be found on our homepage:
www.flex-tools.com

-Declaration of Conformity

We declare under our sole responsibility
that the product described under "Technical
Data" conforms to the following standards
or normative documents:
EN 60335-1, EN 60335-2-29, EN 55014-1,
EN 55014-2, EN 61000-3-2, EN 61000-3-3,
2014/35/EC, 2014/30/EC.
Responsible for technical documents:
FLEX-Elektrowerkzeuge GmbH, R & D
Bahnhofstrasse 15, D-71711 Steinheim/Murr
Eckhard Rühle
Klaus Peter Weinper
Manager Research &
Head of Quality
Development (R & D)
Department (QD)
13.01.2016
FLEX-Elektrowerkzeuge GmbH
Bahnhofstrasse 15, D-71711 Steinheim/Murr

Disposal information

WARNING!
Render redundant power tools unusable
by removing the power cord.
EU countries only
Do not throw electric power tools into the
household waste! In accordance with the
European Directive 2012/19/EC on Waste
Electrical and Electronic Equipment and
transposition into national law used electric
power tools must be collected separately
and recycled in an environmentally friendly
manner.
10
Recycling raw materials instead
of waste disposal.
Device, accessories and packaging should
be recycled in an environmentally friendly
manner. Plastic parts are identified for
recycling according to material type.
WARNING!
Do not throw accumulators/batteries into the
household waste, fire or water.
Do not open disused batteries.
Accumulators/batteries should be collected,
recycled or disposed of in an
environmentally friendly manner.
EU countries only:
In accordance with Directive 2006/66/EC
defective or used batteries must be
recycled.
NOTE
Please ask your dealer about disposal
options!

Exemption from liability

The manufacturer and his representative
are not liable for any damage and lost profit
due to interruption in business caused
by the product or by an unusable product.
The manufacturer and his representative
are not liable for any damage which was
caused by improper use of the power tool
or by use of the power tool with products
from other manufacturers.
CA 10.8

Werbung

Kapitel

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Ca 10.8

Inhaltsverzeichnis