HDMI Amplifier Splitter DIGITUS HDMI SPLITTER Dear Customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. 1.0 INTRODUCTION The HDMI Amplifier Splitter are splitter with two, four or eight outputs.
HDMI Amplifier Splitter 2.0 SPECIFICATIONS (DS-41300 / DS-42300 / DS-43300) Signal Inputs/Output Input DDC Signal 5 volts p-p (TTL) Maximum Single Link Range 1920X1080p Output Video HDMI + HDCP1.0/1.1 Operating Frequency Vertical Frequency Range 50/60Hz Video Amplifier Bandwidth 2.25Gbps/225MHz Resolutions(HDTV) Interlaced(50&60Hz)
HDMI Amplifier Splitter 5.0 CONNECTION AND OPERATION 1) Connect the HDMI input source and output devices into the HDMI Splitter. (HDMI cables are optional) *please refer to the connection diagram section. 2) Insert the DC side of 5v power supply into it and then connect the AC side of the power supply into the wall outlet.