Roborock Q7 Bedienungsanleitung Seite 10

Mop Cloth
C7
* Clean after each use and replace every 3 to 6 months
C7-1—Remove the mop cloth from the
mopping module. Wash and air dry
the mop cloth.
Notes:
• After cleaning, always remove the mop cloth to prevent
dirty water from leaching back into the clean water tank.
• A dirty mop cloth will compromise the washing
performance. Clean it before use.
Filter Components
C8
* Replace them every 1 to 3 months
C8-1—Mop Attachment Slot
1. Move your finger along the notch to
remove each filter.
2. Insert new filter components and make
sure they are properly installed.
Note: To ensure cleaning performance, replace the filter
components every 1 to 3 months, depending on the water
quality and how often you use the robot.
Charging Contact Areas
C9
* Clean every month
Clean the charging contacts of the dock and
the robot with a soft, dry cloth.
Battery
The robot is equipped with a high-
performance lithium-ion rechargeable
battery pack. To maintain battery
performance, keep the robot charged
during normal use.
Note: If the robot will be left unused for a long period, turn it
off and charge it at least every three months to avoid battery
damage caused by over-discharge.
10
Basic Parameters
Robot
Model Q400RR
14.4V/5200mAh
Battery
lithium-ion battery
Weight Approx. 3.2kg
Rated Input 20V
Charging Time < 6 hours
Note: The serial number is on a sticker on the underside of
the robot.
Charging Dock
Model CDZ11RR or CDZ12RR
Rated Power 28W
Rated Input 100-240V~
Rated Output 20V
Rated Frequency 50-60Hz
14.4V/5200mAh
Charging Battery
lithium-ion battery
1.2A
1.2A