AEG S63300KDX0 Benutzerhandbuch Seite 33

Before carrying out any
operation, please be sure
that the appliance is empty.
If not, please move all goods
into right temperature for
proper food storage reason.
1. Tilt back the appliance carefully so
that the compressor cannot touch
the floor.
2. Remove the plinth. (1)
3. Remove the cap (2) and position it on
the opposite side.
4. Unscrew the lower pin and remove
the washers (3)
3
5. Remove the door.
6. Position the pin and the washers on
the opposite side (4).
7. Unscrew the upper pin (1) and screw
it on the opposite side. (2)
2
8. Remove the handle. Unscrew the top
handle bracket from the handle rod
4
2
5
1
1
(1). Unscrew the bottom handle
bracket from the door (2)
9. Unscrew the top handle bracket from
the door (3).
1
2
10. Re-screw the handle bracket on the
door (4). Turn the handle bracket with
the handle and screw them to the
door (5) and the fitted handle bracket
(6)
5
4
11. Re-insert the door on the lower hinge
pivot .
12. Re-insert the door on the upper
hinge pivot slightly tilting the door.
13. Screw the lower hinges.
14. Refit the plinth.
CAUTION!
Reposition, level the
appliance, wait for at least
four hours and then connect
it to the power socket.
ENGLISH 33
3
6