Accessories - Ohaus Ranger 7000 Bedienungsanleitung

Ethernet Interface
OPERATION
Output
With the interface installed the terminal will operate in one of the following two ways:

Auto Print = off, Stable = on or off
Pressing PRINT will send the display data.
If Stable is set to On, the balance will wait for a stable reading before sending the stable data.

Auto Print = not off, Stable = on or off
The balance will automatically send data based on the settings in the Menu.
If Stable is set to On, only stable values will be sent.
Data sent from the Interface is in standard ASCII format terminated with a [CRLF] (carriage return-line
feed). For the output format please refer to the Ranger 7000 instruction manual.
Input
The scale will respond to various commands sent via the interface adapter. Terminate the following
commands with [CRLF].
Commands
For the full list of commands, please refer to the Ranger 7000 instruction manual.

ACCESSORIES

For a complete listing of OHAUS printers and other accessories, contact OHAUS Corporation or visit
www.OHAUS.com
EN-3