Delivery Contents; Description Of Symbols; Safety Instructions - Renkforce Rf-Wm-210 Bedienungsanleitung

Operating Instructions
RF-WM-210 2.4 GHz Wireless Mouse
Item no: 2913595
1 Operating Instructions for download
Use the link www.conrad.com/downloads
complete operating instructions (or new/current versions if available). Follow the instructions
on the web page.
2 Intended use
This item is intended to be used as a wireless mouse.
The product is intended for indoor use only. Do not use it outdoors.
Contact with moisture must be avoided under all circumstances.
If you use the product for purposes other than those described, the product may be dam-
aged.
Improper use can result in short circuits, fires, or other hazards.
The product complies with the statutory national and European requirements.
For safety and approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product
available to third parties only together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights
reserved.

3 Delivery contents

■
Mouse
■
1x AA battery
■
Operating instructions

4 Description of symbols

The symbol with the exclamation mark in the triangle is used to indicate important
information in this document. Always read this information carefully.

5 Safety instructions

Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling, we assume no liability for any resulting personal injury or
damage to property. Such cases will invalidate the warranty/guarantee.
5.1 General
■
The product is not a toy. Keep it out of the reach of children and pets.
■
Do not leave packaging material lying around carelessly. This may become dangerous
playing material for children.
■
If you have questions which remain unanswered by this information product, contact our
technical support service or other technical personnel.
■
Maintenance, modifications and repairs must only be completed by a technician or an
authorised repair centre.
5.2 Handling
■
Handle the product carefully. Jolts, impacts or a fall even from a low height can damage
the product.
5.3 Operating environment
■
Do not place the product under any mechanical stress.
■
Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam
and solvents.
■
Protect the product from high humidity and moisture.
■
Protect the product from direct sunlight.
5.4 Operation
■
Consult an expert when in doubt about the operation, safety or connection of the
product.
■
If it is no longer possible to operate the product safely, take it out of operation and pro-
tect it from any accidental use. DO NOT attempt to repair the product yourself. Safe op-
eration can no longer be guaranteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses.
5.5 Battery
■
Correct polarity must be observed while inserting the battery.
3
(alternatively scan the QR code) to download the
■
The battery should be removed from the device if it is not used for a long period of time
to avoid damage through leaking. Leaking or damaged batteries might cause acid burns
when in contact with skin, therefore use suitable protective gloves to handle corrupted
batteries.
■
Batteries must be kept out of reach of children. Do not leave batteries lying around, as
there is risk, that children or pets swallow them.
■
Batteries must not be dismantled, short-circuited or thrown into fire. Never recharge non-
rechargeable batteries. There is a risk of explosion!
5.6 LED light
■
Do not look directly into the LED light!
■
Do not look into the beam directly or with optical instruments!
5.7 Connected devices
■
Also observe the safety and operating instructions of any other devices which are con-
nected to the product.
6 Overview
1
7 6 5
Component
1 Tracking speed selection
button DPI
2 Wireless receiver
3 Battery compartment
4 Power switch ON/OFF
5 Back button
6 Forward button
7 Scroll wheel with button
7 Cleaning and care
Important:
Replace the batteries at least once a year to prevent leaking.
Important:
– Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions.
They damage the housing and can cause the product to malfunction.
– Do not immerse the product in water.
1. Clean the product with a dry, fibre-free cloth.
4 3
Description/Action
Repeatedly press the tracking speed selection button
to set tracking speeds.
Selection sequence: 1000 - 1200 - 1600 dpi
Unlock and remove the battery compartment cover.
Connect the wireless receiver to a USB port of the
computer that you want to control with the mouse.
Unlock and remove the battery compartment cover.
Insert 1x AA battery to power the mouse.
Replace the battery if the mouse no longer responds.
Move the power switch to ON to power the mouse on.
Move the power switch to OFF to power the mouse
off and conserve battery power.
Open the previous webbrowser page.
Open the next webbrowser page.
Assign an action to the scroll wheel button via the op-
erating system.
2